Olympus STM7 Instructions Manual page 9

CAUTION - Protection for electric shock -
Do not insert any tools or metal fragments in the air vents of the device.
Doing so could cause electric shock or failure of the product.
Do not bend, pull or tie the power cord/cables in a bundle.
Otherwise they could be damaged, causing a fire or an electric shock.
Remove the power cord from the product when replacing the fuses.
To avoid electric shock hazards when replacing the fuses, turn the main switch to " \ "(OFF), then remove the power
cord from the product in advance.
Applicable fuses:
CAUTION - Protection for injury -
Do not touch around the opening of the Z-axis motorized type.
Your hands or fingers may be pinched.
CAUTION - Light from the objective lens -
Do not look directly at the light coming out from the objective lens and the reflected light from the
measurement object.
Be careful about the light coming out from the objective lens, since not only visible light but also light of invisible
wavelengths (such as ultraviolet and infrared) may be emitted depending on the illumination methods.
CAUTION - LED (light emitting diode) -
Do not look directly at the light from the LED unit for a long time.
The LED built in this product is basically eye-safe. However, do not look directly at the light from the LED unit for a long
time, since it may cause damage to your eyes.
T5 A H 250 V (LITTELFUSE 0215005.MXP)
STM7
3