Olympus STM7 Instructions Manual page 72

h
66
Mounting the Observation Tube (MM6-EMO, MM6-
11
ETR, U-TLU)
1
Fully loosen the tube clamping screw g using the Allen screwdriver
g
provided with the microscope frame.
} When using the autofocus unit STM7-AF, fully loosen the tube
clamping screw of the autofocus unit using the Allen screwdriver
provided with the microscope frame.
2
Fit the round dovetail at the bottom of the observation tube h into
the mount on the reflected light arm.
} When using U-TLU, make the positioning reticle facing the front.
3
Tighten the tube clamping screw using the Allen screwdriver provided
with the frame.
When using the eyepoint adjuster
} Only for the large frame STM7-LF/STM7-LFA, the eye point adjuster
U-EPA2 can be attached to the microscope up to 2 levels in the
same way as other intermediate tubes.