Olympus STM7 Instructions Manual page 56

Unit (μm/mm/inch/mil)
Set the units of the counter data.
Setting items
mm
μm
inch
mil
Minimum digit display
Set whether or not to display the minimum digit.
The minimum digit is displayed.
The minimum digit is not displayed.
Buzzer
Set whether or not to beep the buzzer to notify the error or the microscope status.
The buzzer is beeped.
The buzzer is not beeped.
Restoration of light intensity value and objective magnification at startup
Set whether or not to load the last light intensity value memorized to the microscope with the hand switch STM7-HS or
the focus controller STM7-MCZ when you start the microscope.
The light intensity value is not loaded. (The initial value of the factory
default is loaded.)
The light intensity value is loaded
Enable/disable of focus navigator unit
When selecting the illumination you want to control by using the hand switch STM7-HS or the focus controller STM7-
MCZ, set whether or not to allow the focus navigator unit STM7-FN selectable.
The control of the focus navigator unit LED is disabled.
The control of the focus navigator unit LED is enabled.
Whether or not to transmit the counter data
Set whether or not to transmit the counter data to other external processing devices when detecting the connection
between the digital indicator STM7-DI and the microscope.
When the digital indicator is connected, the counter data is not
transmitted to other external processing devices.
When the digital indicator is not connected, the counter data is
transmitted to other external processing devices.
The counter data is transmitted to other external processing devices.
50
(1)
DIP switch DIP switch setting
SW1-1 OFF
SW1-1 ON
Setting items
Setting items
Setting items
Setting items
Setting items
(2)
DIP switch DIP switch setting
SW1-2
SW1-2
DIP switch DIP switch setting
OFF
SW1-3
DIP switch DIP switch setting
OFF
SW1-4
DIP switch DIP switch setting
SW1-6
*1
*1 Regardless of the connection with the digital indicator STM7-DI.
Example
OFF 101.6000
ON 101600.0
OFF 4.00000
ON 4000.00
Example
101.6000
ON 101.600
ON
DIP switch DIP switch setting
OFF
SW1-5
ON
OFF
ON
DIP switch DIP switch setting
OFF
SW1-7
ON