X/Y/Z Display - Olympus STM7 Instructions Manual

e
a
b
c
d
f
g
h
i
j
k
l m
2

X/Y/Z display

Digital indicator STM7-DI
a X-RESET button: Resets the X-axis counter.
b Y-RESET button: Resets the Y-axis counter.
c Z-RESET button: Resets the Z-axis counter.
d DATA button:
f Indicator:
Excel transfer tool
When this software is installed to the controller, the counter data can
be confirmed by the controller.
This software can be started by double-clicking the [Excel Transfer
Tool] icon g on the desktop.
h X-axis counter
i Y-axis counter
j Z-axis counter
k Transfer to Excel
l Maker setting mode : Sets the microscope.
m Setting
} For details, refer to Help of Excel transfer tool.
When this button is pressed, the count data
being shown in the display e is output to the
controller, data processing device or printer which
is connected to the RS-232C connector.
Confirms whether or not the lower software
limit is set, whether or not the counter data is
displayed in-half, AF mode (motorized frame only),
movement distance of the fine/coarse focusing
knob (motorized frame only), illumination ON/OFF
and the illumination to be controlled.
: Transfers the counter data of X-, Y- and
Z-axis to Microsoft Office Excel .
(Ask Olympus to set the microscope.)
: Sets the Excel transfer tool.
STM7
23