Outputting Counter Data Of X-, Y- And Z-Axis; Counting Counter Data Of X-, Y- And Z-Axis In-Half - Olympus STM7 Instructions Manual

a
b
X
Y
Z
COUNT AF FOCUS LED
Z LIMIT DATA
FULL TRACK COARSE EPI DIA FN
HALF SHOT FINE
d
3

Outputting counter data of X-, Y- and Z-axis

Press the DATA/HALF button a to output the data to the controller,
the data processing device or the printer connected to the RS-232C
connector.
4

Counting counter data of X-, Y- and Z-axis in-half

When keeping the DATA/HALF button a pressed for 3 seconds or
longer, the counter data of the X-, Y- and Z-axis will be displayed in
half of the actual movement values. (The value displayed when the
button is pressed is held in memory.)
When keeping the DATA/HALF button pressed further again, the count-
in-half function is turned OFF. (The value displayed at this time is also
held in memory)
} The ON/OFF of the count-in-half function can be confirmed with the
indicator b of the control box for manual STM7-CB or the display X
c
c of the digital indicator STM7-DI or the COUNT d .
STM7-CB
(Always displayed)
Display X of
STM7-DI
(Displayed for a
specified time)
COUNT of STM7-
DI
(Always displayed)
Count-in-half function: ON Count-in-half function: OFF
X
Y
Z
COUNT AF FOCUS
Z LIMIT
FULL TRACK COARSE EPI
HALF SHOT FINE
STM7
X
Y
Z
LED COUNT AF FOCUS
Z LIMIT
DIA FN FULL TRACK COARSE EPI
HALF SHOT FINE
27
LED
DIA FN