Remote Setpoint Via A 0/4 - ProMinent DULCOMETER Assembly And Operating Instructions Manual

Setting the [Control]
Multiplicative disturbance variable
With the multiplicative disturbance variable, the disturbance variable of the setpoint con‐
troller can be influenced over the entire control range. Here a proportionality factor of
0.00 = 0% and 1.00 = 100 %, including all intermediate values.
Disturbance variable
Parameter Default set‐
ting
Function Off
Signal Frequency
source DI 2
Effect additive
Nominal 10 Hz
value
10.11 Remote setpoint via a 0/4 ... 20 mA analog signal
Continuous display ➨
[Remote setpoint (mA)] ➨
Availability of the remote setpoint
The menu [Remote setpoint (mA)] is only available with the 1-channel control of the
controller.
110
Possible Minimum
values value
On/Off
Frequency
DI 2 / mA
input 2
Additive /
multiplica‐
tive
1...500 Hz 1 Hz
[Control] ➨
➨ or
[Remote setpoint]
Maximum Remark
value
Switches the dis‐
turbance variable
function on or off
Specifies the
signal source from
which the interfer‐
ence signal origi‐
nates
Specifies the
effect of the dis‐
turbance variable
500 Hz Specifies the max‐
imum frequency of
the contact water
meter at maximum
flow
[Control] ➨
or