Error Messages - ProMinent DULCOMETER Assembly And Operating Instructions Manual

18.4

Error messages

Error message text
The connection to the expansion
module is faulty
The mV input voltage is too low
The mV input voltage is too high
The temperature is too low
The temperature is too high
A calibration error exists
No sensor is available
Check the mechanical status of the
sensor. Glass break is possible.
The checkout time was infringed
The mA input current is too high
The mA input current is too low
After elapsing of the delay period a
limit error still exists.
Error sample water exists, e. g. no
flow
The controller is in the
The controller is in the
(Hold)' state
The mA input supply is overloaded
The mA input is overloaded
The level in tank 1 is too low
The level in tank 2 is too low
The level in tank 3 is too low
Cause
'Pause' state
'Pause
Diagnostics
Remedy
141