Setting The [Relays]; Setting Relay 1 - ProMinent DULCOMETER Assembly And Operating Instructions Manual

13

Setting the [Relays]

User qualification: trained user, see
n
Ä Chapter 4.4 'Users' qualifications'
on page 21
Continuous display ➨
[Relays] ➨ [Relays]
Settings for [Channel 2]
In its 2-channel version, the controller
has two measurement channels. This
description for [Channel 1] applies
correspondingly for the settings in
[Channel 2]. The procedure for
making the settings for the channel in
question is identical, however the
parameters to be set may be different.
Differences are pointed out and are
also described.
Relay
Relay 1
Relay 2
Alarm relay
Fig. 91: Setting the [Relays]
Setting [Relay 1], [Relay 2] or
[Alarm relay]
Solely the process for [Relay 1] is
described. The set-up process for
[Relay 2] or the [Alarm relay] is the
same as for [Relay 1].
➨ or
6.1
Limit 1
Off
Off
A1069
13.1

Setting Relay 1

Continuous display ➨
[Relays] ➨ [Relays] ➨
[Relay 1] ➨
Relay 1
Function
Assignment
Fig. 92: Setting Relay 1
Select the respective menu using
the - or
pressing the
ð The relevant setting menu
appears.
Setting the [Relays]
➨ or
or
6.1.1
Limit 1
Channel 1
keys and confirm by
key.
A1070
123