Electrical Installation - ProMinent DULCOMETER Assembly And Operating Instructions Manual

1. Determine the precise position of the device on the control panel using the drilling
template
2. Mark the corner points and drill (drill diameter 12 - 13 mm)
3. With a punching tool or jigsaw make the opening as per the punched template
drawing
4. Chamfer the cut edges and check whether the sealing surfaces are smooth for the
caulk strip
ð Otherwise sealing cannot be guaranteed
5. Press the caulk strip evenly into the groove running around the device
6. Place the device into the control panel and fix in place at the rear by means of the
retaining brackets and PT cutting screws
ð The device should project approx. 35 mm from the control panel
6.3

Electrical installation

User qualifications, electrical installa‐
n
tion: Electrical technician, see
Ä Chapter 4.4 'Users' qualifications'
on page 21
NOTICE!
Moisture at the contact points
You must use suitable construction
and technical measures to protect the
connecting plug, cable and terminals
against moisture. Moisture at the con‐
tact points of the electrical installation
may falsify the measurement result.
Mounting and installation
31