Configuration Of Measured Variables - ProMinent DULCOMETER Assembly And Operating Instructions Manual

Configuration of measured variables

8 Configuration of measured variables
User qualification: trained user, see
n
Continuous display ➨
[Measurement channel 1]
Settings for [Channel 2]
In its 2-channel version, the controller has two measurement channels. This descrip‐
tion for [Channel 1] applies correspondingly for the settings in [Channel 2]. The pro‐
cedure for making the settings for the channel in question is identical, however the
parameters to be set may be different. Differences are pointed out and are also
described.
Fig. 26: Setting measured variables, using the example [Channel 1] and [Chlorine]
The following measured variables can be set at the controller:
Measured variable
[None]
[pH [mV]]
[pH [mA]]
[ORP [mV]]
[ORP [mA]]
50
Ä Chapter 4.4 'Users' qualifications' on page 21
[Measurement] ➨
➨ or
[Measured variable]
➨ or
Channel 1
Measured variable
Sensor type
Measuring range
Temperature compensation
Process temperature
pH compensation
Meaning
The controller does not carry out any
measurement.
pH sensor with mV signal
pH sensor with mA signal
ORP sensor with mV signal
ORP sensor with mA signal
[Measurement] ➨
2.1.1
Cl
CLE3/CLE3.1
0...10.0 ppm
Manual
10.0 °C
Off
A1082
Unit
[pH]
[pH]
[mV]
[mV]
or