Measured Value [Ma General] Calibration - ProMinent DULCOMETER Assembly And Operating Instructions Manual

Calibrating the controller
Incorrect calibration
Should the result of the cal‐
ibration lie outside the
specified tolerance limits,
an error message appears.
In this case the current cal‐
ibration will not be applied.
Check the prerequisites for
the calibration and clear
the error. Then repeat the
calibration
Measured value [mA gen‐
9.6
eral] calibration
Measured value [mA general]
calibration
The measured value [mA general]
cannot be calibrated, this menu item
is shown 'greyed out' and has no
purpose.
96