18
Diagnostics
User qualification: instructed user,
n
Ä Chapter 4.4 'Users' qualifica‐
see
tions' on page 21
Continuous display ➨
[Diagnostics] ➨
Diagnostics
Logbook
Simulation
Device information
Fig. 103: Diagnostics
18.1
Display the [Logbook]
Continuous display ➨
[Diagnostics] ➨
[Calibration log book]
[Calibration log book]
Logbook
Calibration log book
Error log book
Data log book
Messages
Fig. 104: Display the [Logbook]
➨
or
[Diagnostics]
➨
or
[Diagnostics] ➨
18.1.1
The data on the successfully completed
sensor calibrations are stored in the
[Calibration logbook] . Up to 30
internal
calibrations can be stored. Thereafter the
oldest entry is overwritten with the most
9.1
recent entry.
The following data is stored:
Time of calibration (as per the oper‐
n
ating hour counter)
–
d = day
–
h = hour
–
m = minute
Zero point (without measurement unit)
n
Slope (without measurement unit)
n
18.1.2
or
The error messages data are stored in the
[Error log book] . Up to 30 error messages
can be stored. Thereafter the oldest entry
is overwritten with the most recent entry.
9.1.1
Error log book
Entry
Error
Status
--.--.--
Fig. 105: [Error log book]
Diagnostics
Display the [Calibration
log book]
Read [Error log book]
??????????????
--:--:--
9.1.1.2
139