KidKraft Grand Valley Retreat Installation And Operating Instructions Manual page 57

Step 18: Roof Spacer Assembly
A: Attach 1 (200) Roof Spacer to another at the peak using 1 (S4) #8 x 3" Wood Screw. Notice the pilot holes
are towards the bottom of the board. (fig. 18.1)
B: Make sure the assembly is square.
S4
Fig. 18.1
Notice hole position
200
Wood Parts Hardware
2 x Roof Spacer FSC 5/4 x 6 x 32-1/4"
1 x #8 x 3" Wood Screw
200
S4
57