Download Print this page

KidKraft Grand Valley Retreat Installation And Operating Instructions Manual page 84

Step 31: Attach Swings

A: Using 1 Threaded Clip per chain, join 1 Long Swing Chain to each side of the swing belt seat. Make sure to

close the Threaded Clip tightly using an adjustable wrench. (fig. 31.1 and 31.2).

B: Using 1 Threaded Clip per chain, join the Short Swing Chain to the Acro Bar and Acro Handle. Make sure

to close the Threaded Clip tightly using an adjustable wrench. (fig. 31.2 and 31.3)

C: Attach the other end of the swing chains to the Quick Clips attached to the swing hangers. (fig. 31.1)

Fig. 31.1

Threaded Clips attach

to seat and Acro bar.

Swing Seat

Fig. 31.2

Tighten Clip using

adjustable wrench

Short

Swing

Chain

Long Swing Chain

Swing Seat

Threaded Clip

Quick Clip

Fig. 31.3

Chain Link

Acro Bar

Acro Handles

Other Parts

1 x Acro Bar

2 x Acro Handle

2 x Swing Belt Seat

2 x Short Swing Chain

4 x Long Swing Chain

6 x Threaded Clips

F23175