Advertisement
Step 1: Cafe Bench Assembly
Part 2
D: Place 2 (013) Bench Top Cafes on both Bench Leg Assemblies so the ends on each side hang over by 1".
Outside edges of each (013) Bench Top Cafe to be flush to outside edge of each (010) Bench End Support Cafe.
Attach each (013) Bench Top Cafe to each (010) Bench End Support Cafe with 4 (S15) #8 x 1-3/4" Wood Screws
per board. Note: leave a gap of 1/2" minimum between boards on both ends. (fig. 1.3 and 1.4)
E: Pre-drill with a 1/8" drill bit then attach, centred over the pilot holes of the (013) Bench Top Cafes place (014)
Bench Brace Top underneath the boards. Attach with 4 (S15) #8 x 1-3/4" Wood Screws. (fig. 1.3 and 1.4)
Fig. 1.3
010
Wood Parts
2 x
Bench Top Cafe FSC 5 x 4 x 31-7/16"
013
1 x
Bench Brace Top FSC 5 x 4 x 6-1/2"
014
013
014
Flush
Hardware
12 x
#8 x 1-3/4" Wood Screw
S15
S15
010
Fig. 1.4
Side View
1"
20
x 12
1/2" gap minimum both ends
S15
013
010
011
Advertisement
