Advertisement
Step 21: Attach Roof Assemblies to Fort
Part 1
A: With 2 people on the ground and at least 1 person in the fort, lift the Small Roof Assembly with Roof Spacer
Assembly, from Step 19, Part 3, up and over the Back side of the fort. Guide the Roof Assembly onto the fort so
the Roof Spacer Assembly sits flush to the top and outside edges of both (222) F Transom and (223) B Transom.
(fig. 21.1)
B: Attach each (200) Roof Spacer to (222) F Transom and (223) B Transom with 2 (S4) #8 x 3" Wood Screws
per side. (fig. 21.1)
Fig. 21.1
Gable Angle
Support Assembly
223
Roof Spacer
Assembly
Back
S4
4 x
200
Hardware
#8 x 3" Wood Screw
S4
64
222
Flush
S4
Advertisement
