KidKraft Grand Valley Retreat Installation And Operating Instructions Manual page 19

Step 1: Cafe Bench Assembly
Part 1
A: Flush to the top of (011) Bench Leg Cafe place (010) Bench End Support Cafe, angled corners facing down
and centred on the legs. Attach with 1 (H2) 1/4 x 2" Hex Bolt (with lock washer, flat washer and t-nut). Make
sure the top of (010) Bench End Support Cafe is level then attach with 2 (S20) #8 x 1-3/8" Wood Screws as
shown in fig. 1.1.
B: Flush to the outside edge of (011) Bench Leg Cafe attach (012) Bench Base Cafe with 2 (H2) 1/4 x 2" Hex
Bolts (with lock washer, flat washer and t-nut) as shown in fig. 1.1.
C: Repeat Steps A and B to create a second Bench Leg Assembly so it is opposite to the first Bench Leg
Assembly. (fig. 1.2)
1/4"
T-Nut
010
Note hole
location
011
Flush
Wood Parts
2 x Bench End Support Cafe FSC 5/4 x 4 x 7"
010
2 x Bench Leg Cafe FSC 5/4 x 4 x 11"
011
2 x Bench Base Cafe FSC 5/4 x 4 x 16"
012
Flush
1/4" Flat
Washer
1/4" Lock
Washer
H2
S20
H2
1/4" Lock
Washer
1/4" Flat
Washer
Hardware
6 x 1/4 x 2" Hex Bolt (1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
H2
4 x #8 x 1-3/8" Wood Screw
S20
19
Fig. 1.1
012
Flush
H2
S20
Flush
010
Fig. 1.2
1/4"
T-Nut
012
011