KidKraft Grand Valley Retreat Installation And Operating Instructions Manual page 28

Step 5: Swing Side Wall Assembly
Part 1
A: Place 1 (050) Narrow Window Panel on the ground. Measure 3-1/4" up from the bottom of the panel on the
right side and attach a 2 x 2-1/4" Corner Panel Bracket to the panel with 2 (S8) #12 x 3/4" Pan Screws. The flat
edge of the bracket must be facing up and it must be installed on the correct side. (fig. 5.1 and 5.2)
B: Measure 78" from the bottom of (050) Narrow Window Panel and attach a second 2 x 2-1/4" Corner Panel
Bracket with 2 (S8) #12 x 3/4" Pan Screws. The flat edge of the bracket must be facing up and it must be
installed on the correct side. (fig. 5.1 and 5.2)
Note: Bottom of 2 x 2-1/4" Corner Panel Bracket must sit at 78".
C: With a helper hold (043) SW Side Panel up against the right side edge of (050) Narrow Window Panel so the
bottom edges are flush. Attach both Corner Panel Brackets to (043) SW Side Panel with 2 (S8) #12 x 3/4" Pan
Screws per bracket. (fig. 5.1 and 5.2)
Fig. 5.2
050
S8
Wood Parts
1 x Narrow Window Panel FSC 1-1/4 x 16-3/4 x 99"
050
2"
Flat edge
043
2 x 2-1/4"
Corner Panel
Bracket
x 4 per
bracket
Fig. 5.1
78"
3-1/4"
Inside View
Hardware
8 x #12 x 3/4" Pan Screw
S8
28
050
2 x 2-1/4"
Corner Panel
Bracket
Flush
2 x 2-1/4"
Corner Panel
Bracket
Other Parts
2 x 2 x 2-1/4" Corner Panel Bracket
043