KidKraft Grand Valley Retreat Installation And Operating Instructions Manual page 29

Step 5: Swing Side Wall Assembly
Part 2
Note: Make sure panels are square and flush to each other.
D: Pre-drill with a 3/16" drill bit, then fasten the (050) Narrow Window Panel to (043) SW Side Panel with 3
(WL5) 1/4 x 2-1/2" Wafer Lags. (fig. 5.3 and 5.4)
Fig. 5.3
043
Outside View
050
WL5
Hardware
3 x 1/4 x 2-1/2" Wafer Lag
WL5
29
Fig. 5.4
043
Flush
050
WL5