Advertisement
Step 7: Front Wall Assembly
Part 1
A: With at least two helpers lift the Crowsnest Side Wall Assembly and Swing Side Wall Assembly so the (040) Wall
Cafe Window Panel and (051) SL Window Side Panel meet and are tight together as shown in fig. 7.1 and 7.2.
B: Loosely attach (070) Front Ground to (051) SL Window Side Panel and (040) Wall Cafe Window Panel with 4
(WB9) 5/16 x 2-1/8" Wafer Bolts (with flat washer and t-nut) as shown in fig. 7.1, 7.2 and 7.3.
C: Loosely attach (071) Front Floor to (040) Wall Cafe Window Panel with 2 (WB8) 5/16 x 2-3/8" Wafer Bolts (with
flat washer and t-nut) as shown in fig. 7.1, 7.2 and 7.4.
D: Make sure the assembly is square then attach (060) SL Panel and (043) SW Side Panel to (071) Front Floor with
2 (S4) #8 x 3" Wood Screws per side then tighten bolts. (fig. 7.1, 7.2 and 7.4)
Fig. 7.1
Outside View
Crowsnest
Side Wall
Assembly
Fig. 7.4
S4
043
071
Wood Parts
1 x
Front Ground FSC 5/4 x 4 x 64-1/4"
070
1 x
Front Floor FSC 2 x 4 x 64-1/4"
071
Swing
Side Wall
Assembly
WB8
with 5/16"
Flat Washers
Front
040
with 5/16"
WB9
Flat Washers
051
Hardware
2 x
5/16 x 2-3/8" Wafer Bolt (5/16" flat washer, 5/16" t-nut)
WB8
4 x
5/16 x 2-1/8" Wafer Bolt (5/16" flat washer, 5/16" t-nut)
WB9
4 x
#8 x 3" Wood Screw
S4
Fig. 7.2
Inside View
043
051
5/16"
070
T-Nut
34
070
S4
060
Fig. 7.3
5/16" T-Nut
040
071
060
Advertisement
