Advertisement
Step 17: Gable Angle Support Assembly
Part 3
E: Place (186) Centre Gable on (185) Sunburst, tight to the top of (192) Gable Bottom so the tip is centred at the
peak of the Gable Angle Support Assembly. (fig. 17.6)
F: Place 1 (187) Side Gable tight to each side of (186) Centre Gable so they are tight to the top of (192) Gable
Bottom. (fig. 17.6)
G: Attach (186) Centre Gable with 4 (S20) #8 x 1-3/8" Wood Screws and both (187) Side Gables with 3 (S20) #8
x 1-3/8" Wood Screws per board as shown in fig.17.6.
190
Wood Parts
1 x
Centre Gable FSC 1 x 4 x 13-1/2"
186
2 x
Side Gable FSC 1 x 4 x 8-1/2"
187
Fig. 17.6
S20
187
192
Hardware
10 x
#8 x 1-3/8" Wood Screw
S20
56
186
x 3
Tight
185
S20
x 4
S20
x 3
187
191
Advertisement
