KidKraft Grand Valley Retreat Installation And Operating Instructions Manual page 54

Step 17: Gable Angle Support Assembly
Part 1
A: Attach (190) Right Gable Angle to (191) Left Gable Angle at peak using 1 (S4) #8 x 3" Wood Screw. (fig.
17.1)
B: In the bolt holes on (192) Gable Bottom tap in 2 - 5/16" t-nuts then place (192) Gable Bottom on (190) Right
Gable Angle and (191) Left Gable Angle so it is flush to the outside edges of the boards. (fig. 17.2)
C: Flip the assembly over so the large counter sunk holes are facing up. Attach (192) Gable Bottom to (190)
Right Gable Angle and (191) Left Gable Angle with 2 (G8) 5/16 x 2" Hex Bolts (with lock washer and flat washer).
(fig. 17.2 and 17.3)
Fig. 17.2
191
G8
Wood Parts
1 x Right Gable Angle FSC 5/4 x 4 x 31"
190
1 x Left Gable Angle FSC 5/4 x 4 x 31"
191
1 x Gable Bottom FSC 2 x 4 x 34-1/2"
192
Fig. 17.1
191
190
5/16" T-Nut
192
5/16" Lock
Washer
1 x
S4
2 x
G8
S4
190
191
Flush
5/16" Flat Washer
Hardware
#8 x 3" Wood Screw
5/16 x 2" Hex Bolt
(5/16" lock washer, 5/16" flat washer, 5/16" t-nut)
54
Fig. 17.3
190
Flush
192