Advertisement
Step 2: Access Ladder / Rockwall Assembly
Part 1
A: Place (020) Left Access Rail on left hand side of 4 (022) Ladder Treads and (021) Right Access Rail on right
hand side with the grooves facing in. (fig. 2.1)
B: Fit each (022) Ladder Tread into grooves on both (020) and (021) Access Rails, make sure the top edge of the
treads are flush to the front of the Access rails. (fig. 2.1 and 2.2)
C: Pre-drill pilot holes with a 1/8" drill bit and attach Rails and Ladder Treads together using 4 (S3) #8 x 2-1/2"
Wood Screws per tread. (fig. 2.1)
Fig. 2.1
Right Side
021
Left Side
020
Fig. 2.2
End View
Wood Parts
1 x
Left Access Rail FSC 2 x 4 x 62-7/8"
020
1 x
Right Access Rail FSC 2 x 4 x 62-7/8"
021
4 x
Ladder Tread FSC 5/4 x 4 x 13-3/4"
022
S3
S3
022
Hardware
16 x
#8 x 2-1/2" Wood Screw
S3
2 x
5/16 x 1-3/8" Wafer Bolt
WB2
(5/16" flat washer, 5/16" t-nut)
22
D: Attach Swing Brackets to the inside top of (020)
and (021) Access Rails at angled edge using 1 (WB2)
5/16 x 1-3/8" Wafer Bolt (with flat washer and t-nut)
per bracket. Edge of Swing Bracket is flush with edge
of access rails. (fig. 2.1 and 2.3)
022
Fig. 2.3
Top of Ladder View
Swing
Bracket
WB2
5/16" Flat
Washer
Flush to
5/16" T-Nut
edges
Other Parts
2 x Swing Bracket
021
Advertisement
