Low Voltage Directive; Electromagnetic Compatibility Directive; System Description; Location - Ingeteam Ingecon Sun 250 TL Installation Manual

Ingeteam Energy, S.A.
• Electromagnetic Compatibility Directive 2004/108/EC
To comply with each directive, compliance with the parts applicable to our units of the appropriate harmonised stand-
ards is sufficient.

Low Voltage Directive

Ingecon Sun Power Max units comply with this directive by means of compliance with the applicable parts of harmo-
®
nised standard EN 50178 Electronic equipment for use in power installations.

Electromagnetic Compatibility Directive

Ingecon Sun Power Max units comply with this directive by means of compliance with the applicable parts of har-
®
monised standards:
• EN 61000-6-2 Electromagnetic Compatibility. Part 6-2: Generic standards - Immunity for industrial
environments.
• EN 61000-6-4 Electromagnetic Compatibility. Part 6-4: Generic standards - Emission for industrial
environments.
Compliance with these standards calls for compliance with limits and procedures in other standards of the same
series.

2. System description

2.1. Location

The Ingecon Sun Power Max units need to be installed in environments with specific characteristics.
®
Guidelines are provided in this section for choosing a suitable environment and adapting the unit to it properly.

2.1.1. Environment

CAUTION
Place the units in a place which is accessible for installation and maintenance work and which per-
mits use of the keyboard and the reading of the front indicator LEDs.
CAUTION
The air vents and part of the cabinet close to them can reach 85 °C. Do not place any material
nearby which is sensitive high air temperatures.
CAUTION
Avoid corrosive environments that may affect the proper operation of the inverter.
CAUTION
Never place any object on top of the unit.

2.1.2. IP grade

Ingecon Sun Power Max units have a IP20 level of protection against external agents.
®
IP20 means that the unit is fully protected against the ingress of dust and also against water streams from any direc-
tion as defined for this level of protection in standard IEC60529.
14
Installation manual
AAV2000IKI01