Ingeteam Ingecon Sun 250 TL Installation Manual page 90

Ingeteam Energy, S.A.
Other adjustments
Various internal adjustments.
CAN Num Change
From this menu you can change the inverter's node number. This is needed for configuring the inverters. Because
this action involves hardware-altering operations, instructions for changing the node number are given at the unit's
set point.
9.7. Inverter data
This window displays inverter-specific data:
Serial Number (SN)
Firmware Version (Firm)
Display firmware version (DisFirm)
Boot version of the display (DisBoot)
9.8. Change inverter number
From this menu you can assign the inverter a number. This is required for configuring communications.
With keys and
90
10:22
INVERTER DATA
SN:
Firm:
CRC:
DisFirm:
DisBoot:
Number that identifies the inverter.
Shows the name and version of the inverter firmware.
Shows the name and version of the inverter display.
Shows the name and version of the display Boot.
you can change the inverter number. Press
14/04/11
250091221R34
AAS1040_P
9789
1091_B
1012_B
to confirm the number selected.
Installation manual
AAV2000IKI01