Handling And Unpacking - Ingeteam Ingecon Sun 250 TL Installation Manual

Installation manual
In addition to the unit serial number, each inverter has its own serial number indentified by the last digit. The serial
number (S/N) ending in 0 is for the complete unit, and the serial number ending in 1, 2 and 3 is for its respective
inverters. For example, inverter number 2 will feature the following ratings plate:
The ratings plate of the inverters can be found on a prominent place inside the cabinet.
Transport damage
If the equipment has been damaged during transport, proceed as follows:
1. Do not proceed with the installation.
2. Notify the distributor immediately within 5 days of receipt of the equipment.
If ultimately the unit has to be returned to the manufacturer, you must use the same original packaging.

3.3. Handling and unpacking

Correct handling of the units is vitally important in order to:
• Prevent damage to the packaging which enables them to be kept in optimum condition from shipping until
they are unpacked.
• Avoid knocks and/or falls which may harm their mechanical characteristics, e.g. cause incorrect closure of
doors, loss of IP rating, etc.
• Avoid, as far as possible, vibrations which may cause subsequent malfunction.
If you observe any anomaly, please contact Ingeteam Energy S.A. immediately.
Recycling the Packaging
All the packaging can be delivered to a non-hazardous waste management company.
In any event, each part of the packaging may be recycled as follows:
AAV2000IKI01
Ingecon
Pac
Uac:
S/N
Std:
Location of the unit's ratings plate
Ingecon Sun 500 TL
®
Pac 500 kW
Uac: 3 x 230 Vac
S/N 500080102R52
Std:
Avda.
31621 Sarriguren (Navarra)
solar.energy@ingeteam.com
Sun 500 TL IP20
®
500 kW Udc:
3 x 230 Vac Freq:
500080102R50
Avda. Ciudad de la Innovación, 13
31621 Sarriguren (Navarra)
solar.energy@ingeteam.com
Tel 948 288000
Fax 948 288001
IP20 2011
Udc: 405 - 900 Vdc
Freq: 50 Hz
Ingeteam Energy, S.A.
Ciudad de la Innovación, 13
Tel 948 288000
Fax 948 288001
2011
405 - 900 Vdc
50 Hz
21