Installation manual
Ensure that the load is distributed evenly between the eyes.
Tie individual cables, chains or ropes to each of the eyebolts, taking into account that the angle Φ is less than or equal
to 45° and ensuring that the cables are left as vertical as possible.
It is always advisable to use a load frame as in the adjoining figure for a proper distribution of the loads, bearing in
mind that the angle φ should be equal to 90°.
3.5. Storage
If the unit is not installed immediately after receipt, the following points should be taken into account in order to
prevent damage:
•
The package must be stored in the vertical position.
•
Keep the unit free of dirt (dust, shavings, grease, etc) and away from rodents.
•
Keep away from water splashes, welding sparks, etc.
AAV2000IKI01
Ingeteam Energy, S.A.
23