Ingeteam Ingecon Sun 250 TL Installation Manual page 3

Installation manual
Important safety precautions
This manual contains important instructions for the installation, handling and use of the following models:
• Ingecon Sun 250 TL
®
• Ingecon Sun 315HE TL
®
• Ingecon Sun 365HE TL
®
• Ingecon Sun 375 TL
®
• Ingecon Sun 400HE TL
®
• Ingecon Sun 420HE TL
®
• Ingecon Sun 500 TL
®
• Ingecon Sun 500HE TL
®
and any models derived from these.
Read these instructions and keep them in a safe place.
General warnings
CAUTION
The operations described in the manual may be performed only by qualified personnel.
All applicable safety-related for electrical work must be complied with. Danger of electric shock.
The entire manual must be read and understood in full prior to manipulating, installing or operating
the unit.
CAUTION
The status of qualified personnel referred to in this manual will be, as a minimum, that which meets
all the standards, regulations and laws regarding safety applicable to the tasks of installing and
operating this unit.
The responsibility for designating qualified personnel will always fall to the company to which the
personnel belong. It is necessary to decide which workers are suitable or not for carrying out specific
work to preserve their safety at the same time as complying with occupational safety legislation.
These companies are responsible for providing appropriate training in electrical equipment to their
personnel and for familiarising them with the contents of this manual.
CAUTION
Opening the doors to the different cubicles does not imply lack of voltage inside.
Only qualified personnel may open them, following the instructions in this manual.
CAUTION
The risk of electric shock exists even after disconnecting from the grid, the PV array and the auxiliary
supplies.
AAV2000IKI01
• Ingecon Sun 550HE TL
®
• Ingecon Sun 600HE TL
®
• Ingecon Sun 625HE TL
®
• Ingecon Sun 630HE TL
®
• Ingecon Sun 730HE TL
®
• Ingecon Sun 800HE TL
®
• Ingecon Sun 840HE TL
®
Ingeteam Energy, S.A.
iii