Grid Voltage; Grounding (Only Units With A Transformer) - Ingeteam Ingecon Sun 3.6TL U Installation Manual

Ingeteam Inc

9.5.2. Grid voltage

17:32 17:32
Country/Normative Country/Normative
Grid voltage Grid voltage
17:32 17:32
You can move from one setting to another using the
17:32 17:32

9.5.3. Grounding (only units with a transformer)

This menu is used to configure the status of the positive and negative poles with respect to ground. It allows three
options, which are:
• Positive pole grounded, negative pole insulated.
• Negative pole grounded, positive pole insulated.
• Positive and negative poles insulated.
Press on the Grounding option from the Configuration submenu.
The following screen will appear showing the three avail-
able options. Select the desired option using the
and keys, then press
60
30/04/12 30/04/12
30/04/12 30/04/12
and
30/04/12 30/04/12
.
This menu serves to modify the configuration of the voltage
output to the terminal strips.
Access is by selecting and then clicking on
voltage menu.
The variables displayed in this menu are organized into
two screens.
17:32 17:32
keys. Then, press
Press again to confirm your selection or
cancel it.
17:32 17:32
Installation manual
the Grid
30/04/12 30/04/12
to confirm your selection.
to
30/04/12 30/04/12
AAY2000IKI02