Ce Marking; Low Voltage Directive; Electromagnetic Compatibility Directive; Vde0126-1-1 Disconnection Device - Ingeteam Ingecon Sun Lite Series Installation Manual

Installation Manual Manual de instalación
INGECON® SUN LITE INGECON® SUN LITE
AAY2000IKH01 AAY2000IKI01

1.3.1 CE marking

CE marking is mandatory for the sale of any product within the European Union, without prejudice to standards or
laws. INGECON SUN LITE units have CE marking by reason of their compliance with the following directives:
- Low Voltage Directive 2006/95/EC.
- Electromagnetic Compatibility Directive 2004/108/EC
To comply with each directive, compliance with the parts applicable to our units of the appropriate harmonised
standards is sufficient.

1.3.1.1 Low Voltage Directive

INGECON SUN LITE units comply with this directive by means of compliance with the applicable parts of
CATÁLOGOS
harmonised standard EN 50178 Electronic equipment for use in power installations.

1.1.3.1.2 Electromagnetic Compatibility Directive

Ingecon
INGECON SUN LITE units comply with this directive by means of compliance with the applicable parts
of harmonised standards:
PC00ISA01_A
- EN 61000-6-2 Electromagnetic Compatibility. Part 6-2: Generic standards - Immunity for industrial
environments.
- EN 61000-6-3 Electromagnetic Compatibility. Part 6-3: Generic standards - Emission standard for
residential, commercial and light-industrial environments.
Compliance with these standards calls for compliance with limits and procedures in other standards.

1.3.2 VDE0126-1-1 disconnection device

In countries such as Germany, Portugal and France, incorporating a device of this type facilitates compliance with
MANUALES
the regulations in force for photovoltaic and microgeneration facilities.
As such, our units comply with the standard:
Manual de Usuario Ingecon
-
VDE 0126-1-1 Automatic disconnection for generating installations connected in parallel with the low
voltage grid
Compliance with this standard must be requested on ordering the unit.
AAY2000IKE01

1.3.3 Regulations for connection to the ENEL Distribuzione grid

In Italy, to connect to the company ENEL's grid, it is necessary to comply with the regulations the company de-
Manual de Instalación Ingecon
mands.
Hence our units comply with the applicable part of standard:
- RTC alle rete BT di Enel Distribuzione.
AAY2000IKH01
Compliance with this standard must be requested on ordering the unit.
Manual de Instalación de los Accesorios de Comunicación

1.3.4 Engineering Recommendation G83/1

In the United Kingdom there is document G83/1, which recommends the characteristics a microproduction genera-
AAX2002IKH01
tor needs to have:
- Recommendations for the connection of small-scale embedded generators in parallel with public low-voltage
distribution networks.
Compliance with this standard must be requested on ordering the unit.

1.3.5 Compliance with Australian and New Zealand regulations

The two standards to be met in Australia are:
- AS/NZS 3100. General requirements for electrical equipment.
- AS/NZS 4777. Grid connection of energy systems via inverters.
Compliance with this standard must be requested on ordering the unit.
AAY2000IKH01 AAY2000IKI01
Rev. _B Rev. _B
Fecha: Marzo 2011 Date: March 2011
DOCUMENTACIÓN RELACIONADA
®
Sun Catálogo Comercial
®
Sun LITE
®
Sun LITE
Page 11 11 Page 3