Display - Ingeteam Ingecon Sun 250 TL Installation Manual

Installation manual

9.2. Display

The current date and time on the top line. The internal clock
automatically changes the time from summer to winter and vice
versa.
The node number for which data is being viewed appears
beneath the top line on the left.
The central section provides instantaneous PV array voltage,
power fed in by the inverter and output voltages.
The bottom line displays the functions for each of the keys.
If the inverter is manually shut down, the display will read "STOPPED" instead of displaying the power fed in by the
inverter.
In the initial screen, in normal operation, the keypad functions are as follows:
Manual shutdown.
Main menu access.
Change node.
If there are any active alarms in the inverter, the bottom, empty
box will flash "ALRM". By pressing the ESC key,
you can see all the alarms which are active at that moment.
For example:
To exit this screen, press
AAV2000IKI01
10:22
ALARM INST = 1403
FREQUENCY ALARM
VOLTAGE ALARM
MANUAL STOP ALARM
again.
10:22
NODO 1 99,2kW
673V
STOP
10:22
NODO 1 99,2kW
673V
ALRM STOP
14/04/11
Ingeteam Energy, S.A.
14/04/11
229V
229V
229V
MENU NODE
14/04/11
229V
229V
229V
MENU NODE
85