Description Of Cabling Connections - Ingeteam Ingecon Sun 250 TL Installation Manual

Ingeteam Energy, S.A.
During inspection and handling work:
Take care, since even with the AC thermomagnetic and the DC circuit breaker on OFF, cables directly connected to
the grid or panels may still hold hazardous voltages. This includes feed plates and wires between switches/breakers.
As long as the panels are exposed to the light, the DC cables will carry potentially dangerous voltage levels.

5.4.2. Description of cabling connections

Ingecon Sun Power Max units have the following cabling connections:
®
44
Plates for DC connection.
2 pairs for Ingecon Sun Power Max with two
®
inverters.
3 pairs for Ingecon Sun Power Max with three
®
inverters.
4 pairs for Ingecon Sun Power Max with four
®
inverters.
Plates for AC connection.
2 sets of three for Ingecon
inverters.
3 sets of three for Ingecon
three inverters.
4 sets of three for Ingecon
inverters.
Installation manual
Sun Power Max with two
®
Sun Power Max with
®
Sun Power Max with four
®
AAV2000IKI01