RF-Conductor! Controller NIU Remote Configuration
Figure 7-6: Set Transmitter Channels Screen
6.
To re-configure all channels, use the
and press:
The Re-Configure Channels screen appears (see Figure 7-7).
7.
Press
<ctrl + t>
8.
Press
<ctrl +e>
9.
To return to a previous menu or screen, press:
May 1998
<Return>.
to toggle between n for no and y for yes for whether to add an RF channel.
to send the request.
6880494G55-O
to position the cursor to the left of the listing
<tab>
<Ctrl + p>.
Site Encoding Commands
7-7