Table of Contents
Advertisement
RF-Conductor! Controller NIU Remote Configuration
Changing a Password
This command is used to change or set device password. The maximum number of characters
allowed for the Password is 20 characters.
Note:
Check with your system administrator for the factory-set password.
1.
From the Diagnostic menu, use the
Change Password
Figure 5-8: Diagnostics Screen—Change Password
The Change Password screen appears (see Figure 5-9).
2.
Type in a password and press:
May 1998
<tab>
and press:
(see Figure 5-8).
<Return>
.
<Return>
6880494G55-O
to position the cursor to the left of the listing
Diagnostic Commands
5-9
Advertisement
Table of Contents
