Setting Station Ids; Figure 7-14: Infrastructure Command Groups-Set Station Id - Motorola RF-Conductor! 3200 Manual

RF-Conductor! Controller NIU Remote Configuration

Setting Station IDs

This command is used to set station IDs.
1. From the Site Encoding screen, use the
Set Station ID
Figure 7-14: Infrastructure Command Groups—Set Station ID
The set station ID screen appears with two options (see Figure 7-15):
– Add
– Delete
May 1998
and press: (see Figure 7-14).
<Return>
6880494G55-O
to position the cursor to the left of the listing
<tab>
Site Encoding Commands
7-15