Table of Contents
Advertisement
RF-Conductor! Controller NIU Remote Configuration
Figure 7-2: Site Encoding—Change Color Code Screen
2.
From the Site Encoding screen, use the
Change Color Code
The Change Color Code screen appears (see Figure 7-3).
3.
Enter the color code for the transmitter (0 to 127) and press:
4.
To return to a previous menu or screen, press:
May 1998
<tab>
and press:
<Return>
6880494G55-O
Site Encoding Commands
to position the cursor to the left of the listing
<Return>
<Ctrl + p>.
.
7-3
Advertisement
Table of Contents
