Table of Contents
Advertisement
RF-Conductor! Controller NIU Remote Configuration
Figure 6-10: Linkload an Installed NIU/SCM Release—Select Site Controller Type
2.
Position the cursor next to the type of site controller— External NIU, Internal NIU or
Nucleus SCM—to linkload an installed release and press:
The system displays the Send Bank Switch by Version Command screen (see Figure 6-11).
3.
Select the version from the displayed list. Position the cursor next to the version and
press:
<Return>
Note:
If you want to use a version other than those displayed, enter the version label and press:
<Return>
If the command is successful the system displays in the message bar
, otherwise, it displays
accepted
4.
To return to a previous menu or screen, press:
May 1998
.
. The maximum number of characters allowed in the field is 24 characters.
Invalid version name
6880494G55-O
Software Linkload Commands
.
<Return>
Command request
.
<Ctrl + p>.
6-11
Advertisement
Table of Contents
