Figure 1-3: Screen Areas; Navigating The System - Motorola RF-Conductor! 3200 Manual

RF-Conductor! Controller NIU Remote Configuration
Current selection
indicator

Figure 1-3: Screen Areas

The WMS-Data operator console interface is a text-based, command-driven interface. Some
commands can be executed on every screen. These commands are global options. Other
commands can only be executed on specific screens. These commands are window options.
To assist the user, when invalid data is input, the system responds with the valid options in
the message bar.

Navigating the System

Every screen uses the same navigation logic for moving the cursor, typing information and
sending data to the RF-C! controller (see Table 1-2).
May 1998 6880494G55-O
Introduction
Active Area
Message Bar
Events and Alarms Bar
Date and Time Bar
1-9