Diagnostic Commands
Resetting the Dial Modem
This command causes the transmitter to reset the internal modem. Any call in progress is
disconnected.
There are no parameters for this option. From the Diagnostic menu, use the
the cursor to the left of the listing
command (see Figure 5-5).
The Infrastructure Commands Group menu appears with a message
in the message bar of the screen.
accepted
Figure 5-5: Diagnostics Screen—Reset Dial Modem
5-6
RF-Conductor! Controller NIU Remote Configuration
and press:
Reset Dial Modem
6880494G55-O
to position
<tab>
to execute the
<Return>
Command request
May 1998