Table of Contents
Advertisement
RF-Conductor! Controller NIU Remote Configuration
3.
Position the cursor to select a link speed (or no change if you are not changing the link
speed) and press:
56000, 57600, 64000, and 76800 bps.
The Select Link Type screen appears.
4.
Position the cursor to select a link type (or no change if you are not changing the link
type) and press:
3
and FM
.
Note:
For FM
clock is provided externally by the satellite service provider.
The Change Link Parameters screen appears showing the values selected in the previous
steps for stream ID change, link speed, and link type (see Figure 4-12).
Figure 4-12: Change Link Parameters Screen
May 1998
. The following data rates are supported: 9600, 19200, 38400,
<Return>
. The following link types are supported: Analog,
<Return>
2
/SCPC link types, the WMS-Data system provides the clock internally. For FM
6880494G55-O
SuperStream Commands
2
FM
/SCPC,
3
, the
4-13
Advertisement
Table of Contents
