Diagnostic Commands
Resetting NIU Alarms, Logs and Statistics
This command is used to clears alarms, the event log and statistics of a transmitter
There are no parameters for this option. From the Diagnostic menu, use the
the cursor to the left of the listing
the command (see Figure 5-13).
The Infrastructure Commands Group menu appears with a message
in the message bar of the screen.
accepted
Figure 5-13: Diagnostics Screen—Reset NIU Alarms/Log/Stats
5-14
RF-Conductor! Controller NIU Remote Configuration
Reset NIU Alarms/Log/Stats
6880494G55-O
to position
<tab>
and press:
to execute
<Return>
Command request
May 1998