RF-Conductor! Controller NIU Remote Configuration
Resetting NIU Alarms
This command is used to clear transmitter's non-current latched alarms.
There are no parameters for this option. From the Diagnostic menu, use the
the cursor to the left of the listing
command (see Figure 5-12).
The Infrastructure Commands Group menu appears with a message
in the message bar of the screen.
accepted
Figure 5-12: Diagnostics Screen—Reset NIU Alarms
May 1998
and press:
Reset NIU Alarms
6880494G55-O
Diagnostic Commands
to position
<tab>
to execute the
<Return>
Command request
5-13