Table of Contents
Advertisement
RF-Conductor! Controller NIU Remote Configuration
Setting GPS Offset
This command is used to compensate for the propagation time through the base transmitter.
Once the new offset is set, perform a maintenance command to ensure that the offset value
entered provides the appropriate results.
1.
From the Alignment menu, use the
Set GPS Offset
Figure 3-8: Alignment Menu—Set GPS Offset
2.
The Select Sign screen appears. Position the cursor to select Positive or Negative and
press:
<Return>.
3.
The Select Offset screen appears. Position the cursor to select Absolute or Relative and
press:
<Return>.
Absolute value: the transmitter takes in the given value.
Relative value: offsets the current delay value in the transmitter.
May 1998
<tab>
and press:
(see Figure 3-8).
<Return>
6880494G55-O
to position the cursor to the left of the listing
Alignment Commands
3-9
Advertisement
Table of Contents
