Table of Contents
Advertisement
Configuring the Esprit 5055 Video Display Terminal
Setting Up the Esprit 5055
Use the following procedure to setup the Esprit 5055:
1.
Turn on the power to the Esprit 5055.
A message displays during the VDT boot routine to press the F3 key to enter the setup
mode.
2.
Press the
<F3>
3.
Configure the Esprit VDT according to the listed parameters (see Table A-2).
– Press the function key listed in the Menu Item column to access the corresponding
setup parameters.
– Use the right arrow key and then, the up/down arrow keys to access the parameters
for each menu item.
– Use
<Enter>
(see Table A-2).
Table A-2: Esprit Setup
Menu Item
System <F1>
A-4
key to enter the setup mode.
to select the correct settings for single option or pop-up items
Parameter
Setup Language
Port Assignments
AUX port and parallel port
Terminal mode
Control codes
CRT saver
6880494G55-O
RF-Conductor! Controller NIU Remote Configuration
Setting
English
Host 1= MAIN
Host2 = AUX
Not used &Printer
Online (FDX)
Execute
10 minutes
May 1998
Advertisement
Table of Contents
