Software Linkload Commands
Linkloading an Installed NIU/SCM Release
This command is used to linkload an installed NIU or SCM release.
1.
From the NIU/SCM Software Linkload screen, use the
left of the listing
Figure 6-5).
Figure 6-5: NIU/SCM Software Linkload Screen—Linkload an Installed NIU/SCM Release
The Select Site Controller Type screen appears (see Figure 6-6).
6-6
Linkload an Installed NIU/SCM Release
6880494G55-O
RF-Conductor! Controller NIU Remote Configuration
to position the cursor to the
<tab>
and press:
<Return>
(see
May 1998