Figure 2-3: Infrastructure Command Group Select A Distribution Link Id Menu - Motorola RF-Conductor! 3200 Manual

RF-Conductor! Controller NIU Remote Configuration
The system supports four link IDs. These link IDs are programmed with stream IDs in
the Distribution Link Setup screen. Each link ID has a unique stream ID that is sent out to
a large coverage area.
3. Use the
<tab>
<Return>

Figure 2-3: Infrastructure Command Group Select a Distribution Link ID Menu

The Select Destination menu displays (see Figure 2-4).
4. Use the
<tab>
<Return>.
a. All Transmitters in a Stream: displays the Infrastructure Commands Group menu.
b. All Transmitters in a SuperStream System: prompts you to enter SuperStream
System ID before displaying the Infrastructure Commands Group menu. The
SuperStream System ID is a "mapping" to the simulcast system ID.
May 1998
to position the cursor to the left of the link ID number (0-3) and press:
to position the cursor to the left of the destination types and press:
Select the type of destination from the following options:
6880494G55-O
Infrastructure Commands Overview
2-7