Site Encoding Commands
Figure 7-5: Select Channel Options Screen
2.
To add a channel, use the
<Return>.
The Set Transmitter Channels screen appears (see Figure 7-6).
3.
Enter the channel number to add and press:
4.
To delete a channel, use the
<Return>.
The Set Transmitter Channels screen appears (see Figure 7-6).
5.
Enter the channel number to delete and press:
7-6
RF-Conductor! Controller NIU Remote Configuration
to position the cursor to the left of the listing and press:
<tab>
<ctrl +e>.
to position the cursor to the left of the listing and press:
<tab>
<ctrl +e>.
6880494G55-O
Valid values are 0-7.
Valid values are 0-7.
May 1998