Table of Contents
Advertisement
RF-Conductor! Controller NIU Remote Configuration
Figure 6-2: NIU/SCM Software Linkload Screen
2.
From the NIU/SCM Software Linkload screen, use the
left of the listing
The install from tape confirmation screen appears.
3.
Position the cursor to select Yes or No and press:
Selecting No returns to the previous menu and no system action takes place. Selecting Yes
displays information in the message bar of the screen indicating the status of the command. If
the install from tape command is successful the system displays:
Install NIU/SCM Software Version request accepted
4.
To return to a previous menu or screen, press:
May 1998
Install a NIU/SCM release from DAT tape
6880494G55-O
Software Linkload Commands
to position the cursor to the
<tab>
and press:
<Return>
.
<Return>
<Ctrl + p>.
.
6-3
Advertisement
Table of Contents
