RF-Conductor! Controller NIU Remote Configuration
It is possible to lose pages while going from one alignment type to the other. Consider
suspending the coverage area affected before performing this procedure.
CAUTION
Figure 3-6: Select Alignment Type Menu
2.
To select GPS Synchronization, position the cursor to the left of the listing
press:
<Return>.
The GPS Sync options screen appears (see Figure 3-7). The GPS fallback is disabled by
default.
3.
In the Enable Fallback field, press
While using GPS synchronization method it is recommended to enable fallback.
4.
Press
<Ctrl + e>
May 1998
<ctrl + t>
to execute the command.
6880494G55-O
to toggle between n for no and y for yes.
Alignment Commands
c and
GPS Syn
3-7