Battery Charging - Segway Villain SX10 Owner's Manual

1 2
Battery Guard
4
Positive and negative anchor bolts for cable
5
Positive and negative anchor nuts for cable
1. Hold the groove behind the battery guard plate with your hands and move it
forward, and remove the battery board.
2. Remove the battery strap.
3. Flip the protective rubber sleeve up.
4. Remove the negative pole screw and disconnect the black (negative) battery
cable.
5. Remove the positive pole screw and disconnect the red (positive) battery
cable.
6. Remove the battery from the vehicle.

Battery Charging

When charging, the hydrogen produced by the 12V battery
is combustible explosive gas. Please follow the following
If charging the 12V battery is still installed in the vehicle, be
sure to disconnect the ground cable.
Make sure the power switch on the charger is off when
connecting and disconnecting the charger cable to the 12V
Only charge slowly (5A or less), if not the 12V battery may
3
Battery pull strap
CAUTION
!
precautions before charging:
battery.
explode.
4-33
Protective rubber sleeve